Welcome to the website of Yichang Xinwei New Energy Vehicle Manufacturing Co., Ltd.!

- Service Hotline-

0717-4201688

Maintenance of yichang electric sightseeing car

Author:admin Release date: 2019-6-11 10:55:57 share

1. Power loss is strictly prohibited

The storage battery of the electric sightseeing car in yichang is forbidden to be in the state of power loss.The state of power loss refers to that the electric sightseeing car in yichang fails to charge in time after being used for a long time (one month later).When the battery is stored in the state of power loss, it is easy to be sulfurized, and lead sulfate crystals are attached to the electrode plate, which will block the ion channel, resulting in insufficient charging and decreased battery capacity.The longer the battery remains idle, the worse the damage.Therefore, when the sightseeing car is idle, it should be replenished once a month, so as to better maintain the state of declining battery capacity.

2. Regular inspection

In the course of use, if the mileage of the sightseeing car drops sharply in a short period of time, it is likely that at least one battery in the battery pack has a problem.At this time, should be timely to the nearest electric vehicle maintenance point or with a multimeter measurement) and the vehicle will stop using.Then look for electric sightseeing car production and sales center or agent maintenance department for inspection, repair or group.This will extend the life of the battery pack and save you money.Avoid large current discharge

When starting, carrying people and going uphill, the electric sightseeing car should avoid stepping on the accelerator to form instantaneous large current discharge.Large current discharge can easily lead to lead sulfate crystallization, which will damage the physical properties of the battery plate.

3. Charging time

In the process of use, the charging time should be accurately grasped according to the actual situation, and the charging frequency should be grasped by referring to the normal use frequency and driving range.After full charge, the operating time is relatively short, so the charging time should not be too long. Otherwise, excessive charging will occur and the battery will get hot.Overcharge, overdischarge and undercharge can shorten battery life.

4. avoid plug heat

Loose 220v power plug or charger output plug, contact surface oxidation and other phenomena will lead to heat plug, heating too long will lead to plug short circuit or poor contact, damage the charger and battery, to bring you unnecessary losses.Therefore, when the above situation is found, the oxide shall be removed or the connector shall be replaced in time.

5. often check the tire pressure

Keep the tire pressure at the correct level.Must check tire pressure every two weeks or at least once a month;

Incorrect tire pressure will result in power consumption, short driving range, reduced driving comfort, reduced tire life and reduced driving safety;

[Back to list]

[Recommended]↓